 |
|
PTFE (Polytetrafluoroethylene) can be used under the
most adverse conditions. This high performance coating is insoluble,
non-contaminating and has exceptional thermal resistance. It is easy
to clean, does not scratch other surfaces and is unbreakable.
|
A180
|
PTFE Collapsible Impeller
|
· |
38 mm (1.5")
diameter blade with a 8 mm (5/16") diameter
shaft with a length of 400 mm (16")
|
|
· |
stainless steel
core for stability |
|
A183
|
PTFE Anchor Paddle
|
· |
80 mm (3.15")
diameter blade with a 8 mm (5/16") diameter
shaft with a length of 400 mm (16")
|
|
· |
stainless steel
core for stability |
|
A185
|
PTFE 4-blade Propeller
|
· |
38 mm ( 1.5")
diameter blade with a 8 mm (5/16") diameter
shaft with a length of 400 mm (16")
|
|
· |
stainless steel
core for stability |
|
· |
pitch is at a 45
degree angle |
|
· |
right hand
rotation so that when the propeller spins clockwise
the solution is pushed downwards |
|
A408/A410
|
PTFE Vessel Adapter for Glass and Metal Stirrers
|
· |
fits into a 24/40
joint
|
|
· |
excellent vacuum |
|
· |
grease free |
|
· |
available for
either an 8 mm (5/16") shaft diameter (part
number A408) or a 10 mm shaft diameter
(part number A410) |
|
· |
note that this
part will not make a vacuum for a 3/8" (9.525
mm) shaft diameter, the impeller shaft needs to be
either 8 mm or 10 mm |
|
|
A110
Dimensions
|
Safety Stand
|
· |
includes 28"
rod, stand base and allen key
|
|
· |
base-cast
zinc-aluminum alloy with chemical resistant epoxy coating |
|
· |
tube-stainless
steel 304, 25.4 mm (1") diameter |
|
·
|
5kg (11lbs) |
Rod Only
Part Number: ROD-28 or ROD-48
|
· |
available in 28" or 48" lengths
|
Base Only
Part Number: A110BASE
|
|
A210
Dimensions
|
Compact Stand
|
· |
for use with BDC2002 CompactDigital™ and BDC2010 ReversingDigital™ Stirrers
|
|
· |
unique offset design centers paddle in vessel |
|
· |
includes 24" rod, stand base and allen key |
|
·
|
base - cast zinc - aluminum alloy with chemical resistant epoxy coating |
|
·
|
solid rod, stainless steel 304, 15.88 mm (5/8") diameter |
|
·
|
2.6kg (5.7lbs) |
|
|
A120
Dimensions
|
Fastening Clamp
|
· |
used with A110 and A210 above
|
|
· |
Supports stirrer on the rod of the stand |
|
· |
15 mm diameter through 30 mm diameter rods |
|
·
|
hole to hold chuck key |
|
·
|
cast zinc-aluminum alloy with chemical-resistant epoxy coating |
|
·
|
stainless steel 304 |
|
·
|
640g (1.5 lbs) |
|
|
A130
Dimensions
|
Crossed Blade Impeller
|
· |
welded to shaft |
|
· |
weighs 128g |
|
·
|
very high shear with high vortexing characteristics |
|
·
|
will vortex 5 gallons of water at 900 rpm |
|
|
A131
Dimensions
|
Straight Blade Impeller
|
· |
welded to shaft
|
|
· |
weighs 124 g |
|
· |
high shear with moderate vortexing characteristics |
|
·
|
will vortex 5 gallons of water at 1200 rpm |
Compact Straight Blade Impeller
Part Number: A231
|
· |
compact version of the A131
|
|
· |
length of blade is 31 mm (1 1/4") diameter instead of 50 mm (2")
|
|
|
A140
Dimensions
|
Pivoting
Blade Impeller
|
· |
pinned to shaft
|
|
· |
weighs 126 g |
|
· |
moderate shear with moderate vortexing characteristics |
|
·
|
will vortex 5 gallons of water at 800 rpm |
|
|
A141
Dimensions
|
Collapsible Blade Impeller
|
· |
pinned to shaft
|
|
· |
weighs 127 g |
|
· |
high shear radial flow for mixing in carboys or
narrow neck flasks |
|
·
|
collapsed blades enter any opening over 10 mm
diameter |
|
·
|
will vortex 5 gallons of water at 1000rpm |
|
|
A150
Dimensions
|
Square
Blade Impeller
|
· |
welded to shaft
|
|
· |
weighs 180g |
|
· |
for large volumes or high viscosities;
radial flow with maximum
vortexing |
|
·
|
will vortex 5 gallons of water at 450 rpm |
Compact Square Blade Impeller
Part Number: A250
|
· |
compact version of the A150
|
|
· |
blade is 38 mm (1 1/2") square instead of 70 mm (2 3/4")
|
|
|
A160
Dimensions
|
Pitched 3-Blade Propeller with Shaft
|
· |
set screws fasten propeller to shaft
|
|
· |
weighs 181 g |
|
· |
low shear, high top-to-bottom (axial) pumping
capacity with high gas injection |
|
·
|
will vortex 5 gallons of water at 3600 rpm |
Pitched 3-Blade Propeller Only
Part Number: A161
|
· |
set
screws fasten propeller to an 8 mm (5/16") diameter shaft
|
|
· |
can
add multiple propellers to one shaft
|
Shaft Only
Part Number: A162
|
|
Dimensions
|
U
Shaped Anchor Paddles
Part Number: U022 or U044 or U055 or U510
|
· |
blade, hub and shaft welded together
|
|
· |
stainless steel 316L |
|
|
A600-SET
|
Collet Set
|
· |
includes a high speed collet, shaft, dispersion blade, pitched blade
propeller and a straight blade
|
|
· |
used for high speed mixing (1800 - 6000 rpm) |
|
· |
the precision 5/8" diameter shaft is made of 316L stainless steel |
|
·
|
the shaft fits all impellers with a 8mm (5/16") diameter bore |
|
·
|
the blades fasten to the shaft with set screws |
|
|
A170
Dimensions |
StirMax™
|
· |
454g (1lb)
|
|
· |
316L stainless steel with teflon bumper |
|
· |
patent Pending |
|
·
|
reduces mixing time;
decreases
vortexing |
|
·
|
fits a standard 4L beaker |
|
·
|
custom sizes available |
|
